Autel KM100 Adds 2014 Jeep Wrangler Key by OBD OK

Today we’re working on a 2014 Jeep Wrangler and want to add a new key with Autel MaxiIM KM100 for this car. Following I’m gonna show the procedure.


Plug V200 into OBD port, connect to KM100.

IMMO >> JEEP >> Manual selection >> North America >> Wrangler >> 2007-2018 >> Blade key >> Yes


If you have a learned key, turn on the ignition.


Hot function >> Key learning >> Start

To learn programmed keys, you have to finish “Erase Key” first.

Switch the ignition OFF and then ON again, make sure the engine is off.

Autel KM100 gives the read password is 4574.


Please insert the key to be programmed and turn the ignition on, make sure the engine is OFF.

Current number of keys is: 5

Do you want to continue to learn the key? Yes.


Current number of keys is: 6

Learning successful.

Do you want to learn next key? No.


Let’s check the new key, it can crank the car, and remote works well.

Perfect done!


Contact Info:


Wechat: +86-199 4758 6579

Whatsapp: +86-199 4758 6579