This is an operation guide to using Autel MaxiIM KM100 to do universal key generation & IMMO pairing step by step. As a newly developed Automotive Key Tool, let’s learn how easy it works.
How to generate a key with Autel KM100?
Tools Required:
A blank key
Autel MaxiIM KM100
Connect Autel KM100 to Internet.
Step1. Generate Key
Universal Key >> Select vehicle details:
Region: North American
Make: Honda
Series: Accord
Year: 2019
Selected “Honda Accord 2018-2020”
Read the instructions carefully:
- Place the blank key into KM100key slot exactly as shown(Ensure a battery is inside).
- Press “Generate Universal Key”.
Key generation process may take about 1 minute…
Once completed, KM100 screen will show a message indicating success.
Press “Completed” to exit.
Step2. Read Key Info
Special Function >> Universal Key Information Detection >> Detect
KM100 screen will read & display key info.
Done.
Next, we can use Autel KM100 to pair the key with vehicle.
How Autel KM100 pair a key with vehicle?
Tools Required:
A working key
A blank key
Autel MaxiIM KM100
Make sure VCI is connected to OBD & KM100.
We can press “IMMO” directly after key was generated successfully. That means pairing the key with immobilizer system.
Since I have other working keys, I’ll go through “Hot Function”.
Is the ignition turned on by pressing Start button twice? Yes
Add key(guided) >> Start >> OK
Follow the instructions to operate:
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Take 1 registered keyless access remote into the vehicle.
Remove all other keyless access remotes from the vehicle.
Press “OK”.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)
Working key info was read successfully. Now we can proceed to learn the blank key.
Key programming succeeded, would you like to learn the next one? Yes
Take all original keyless access remotes out of the vehicle.
Take a new keyless access remote into the vehicle.
The keyless access remote is now registered. Press “OK”.
Key programming succeeded, would you like to learn the next one? No
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)
Are both the keyless access and immobilizer indicator lights turned off? Yes
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)
The registration is completed.
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Check all keyless access remotes to ensure each will start the engine.
Check all keyless access remotes to ensure each will lock and unlock the doors.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)
All are workable, done.
More tutorials about Autel KM100 Key Generator to be updated.