Hi guys here we’ve collected some common errors you may come across when using Autel IM608 professional key programming tool. Of course we also give solutions on them. We’ll cover
1.Server computation failed. Error code: 1001
2.Network busy (#1) / Error code: 10008
3.Failed to read software name
4.Unsupported package
1.Server computation failed. Error code: 1001
Error:
VW Jetta 2016 AKL, have such a problem. It says “Server computation failed. Please contact the dealer! Error code: 1001”
Solution:
For MQB, IMMO IV and IMMO IV+MQB key programming byAutel IM608/IM508 professional key programming tool, first you should update the software version to at least V5.10.
Then the general steps are:
VW software installed>>Advanced mode>>Send request>>send the VIN and serial number to the dealer>>Get the PIN code and CS code from the dealer>>Expert mode>>Manual input>>Add key(Key learning)/All Keys Lost(Make dealer key)
For further details, please check
2.Network busy (#1) / Error code: 10008
Error:
Update and read pin code for Peugeot 307 2006, can’t connect to the Autel server. It prompts “Network busy (#1)” or “Failed to obtain the server address. Error code: 10008”
Solution:
Replace the network
Go to
System settings>>(The connected network)>>Modify network
Check “Show advanced options” and select “Static”.
Change “DNS 1” IP address into “8.8.8.8” (Google server default) and save it.
Then your IM608 will connect to the Autel server automatically.
3.Failed to read software name
Error:
Toyota Pirus 2014 AKL, using IM608 and APB112 simulator. I connect the APB112 to IM608, but it says “Failed to read software name”.
Solution:
Try another Autel APB112 simulator.
4.Unsupported package
Error:
All vehicles have this prompt (Unsupported Package).
Solution:
Download and update vehicle software you need before programming keys.
Hope this could help!
Any problem, please contact