IM508S KIA(EU) Telluride(ON) IMMO Car List
|Year||System||Add key||All keys lost||Read password||Remote learning||IMMO part replacement|
|2020-2021||Immobilizer||√ (by OBD)||√ (by OBD)||×||√ (by OBD)||ECM|
|2020-2021||Keyless system||√ (by OBD)||√ (by OBD)||√ (partially supported by OBD)||Not required||ECM, SMK, ESCL|
|2022-||Immobilizer||√ (by OBD)||√ (by OBD)||×||√ (by OBD)||ECM|
|2022-||Keyless system||√ (by OBD)||√ (by OBD)||×||Not required||ECM, SMK, ESCL|
Connect Autel IM508S to OBD2 port, enter into
IMMO >> Kia >> Manual selection >> America >> Telluride(ON) >> 2019- >> Smart key >> Yes >> Control unit >> Read immobilizer password
Reading password… please wait.
The password has been read out: 450129
Smart key programming >> Start
This function supports add key and all keys lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally. Press “Yes” to continue.
Turn the ignition off (note: the instrument scree is black).
Open and then close the driver door once!
Please enter the 6-digit security code: 450129
OK >> Yes
Note! Click “OK” to complete the following steps:
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed.)
Press “Yes” to program next key, “No” to complete.
Number of current keys: 2
Please exit the system to the vehicle selection menu and check if the key if programmed successfully.
Test 2 keys, both can work well.